The Ladder Shelving system is something that does not have to be ordered when you order your panels. In other words if you already have panels you can add this to you current setup, and if you are ordering new panels you do not have to have something welded into the frame and cut your carpet to have your shelves.

This is a Ladder system where you can have one panel with shelves from top to bottom. The ladders have 9 places to choose from to put shelves.

The ladders are available in the heights to match your panel sizes. They come in silver vein which will hide scratches and bumps and it could be a contrast that really works well to draw attention to your booth. The shelves for these have groves on the bottom where they sit on the ladders so it secures your ladders and the panels.

If you have any questions please call us for more details.

If shelves for light to medium weight items are desired, we can weld a shelving component called a slot standard into your frames. The slot standard is placed in either the upper, lower, or both sections of the frame. They are placed vertically and six inches from each edge. They add two or four pounds to the panel weight.

Each shelf is made from half inch birch plywood, covered with carpet and comes with two shelf brackets. Shelves are either 8, 10, or 12 inches deep by the width of the panel. Many people use wood, glass, plastic or plexiglass shelves of their own. More than one shelf may be put on a slot standard section.

The slot standard is welded into the frame and hidden behind the carpet so it is necessary to slit the carpet where a shelf is needed. A 4" slit is required and should be unnoticeable when the shelf is not used. We can slit the carpet for you if you provide a measurement from the floor to the desired height of the shelf.

The Retro Fit Kit permanently converts your existing Pro Panels to the new Jacked-Up style.

This feature gives you the ability to adjust your leg up to 12 inches in 1 inch increments.

It is also a way to make your panels taller ...think converting a 6 ft into a 7 ft panel or only having to transport and store a 6 ft with the benefits of a 7ft.

1 kit is needed for each panel. A kit contains 2 legs, 2 couplings, 1 install tool with cutting guide and easy to follow instructions.

Please specify the type of panel you have when ordering. Unfortunately these will not fit our 8 ft Knock Down panels. (Have PDF Instructions for this)